Driver Feedback Sign DFS010

Latitude: 53.543584
Longitude: -113.540249

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

This dataset contains the location (the approximate latitude/longitude of the enforcement zone's mid point), the number of tickets issues at the various speed ranges in excess of the enforce speed limit and the number of enforcement hours (Deployment Hours) by month of enforcement.

Driver Feedback Sign DFS006

Latitude: 53.492769
Longitude: -113.682597

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS081

Latitude: 53.48535
Longitude: -113.57829

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS149

Latitude: 53.492054
Longitude: -113.572041

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS021

Latitude: 53.595875
Longitude: -113.402448

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS111

Latitude: 53.523656
Longitude: -113.665854

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS075

Latitude: 53.62897
Longitude: -113.49998

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS076

Latitude: 53.45735
Longitude: -113.56547

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS098

Latitude: 53.536775
Longitude: -113.648763

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

The City collects speed data from a number of locations across the entire city. The devices used to collect this speed data are referred to as speed survey equipment. To read more about the devices used, please follow this link:

This dataset is a listing of the locations of where the speed survey units have been installed. It also indicates the direction of traffic the unit is installed in and if there is more than one lane of traffic, it also has a lane number to designate that.

Driver Feedback Sign DFS059

Latitude: 53.63327
Longitude: -113.47991

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS036

Latitude: 53.497047
Longitude: -113.511998

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS129

Latitude: 53.5381
Longitude: -113.47025

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS082

Latitude: 53.48056
Longitude: -113.58008

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS088

Latitude: 53.455904
Longitude: -113.541686

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

The City collects speed data from a number of locations across the entire city. The devices used to collect this speed data are referred to as speed survey equipment. To read more about the devices used, please follow this link:

In order to align data that is collected by the speed survey equipment and the Driver Feedback Signs (DFS), the following has been done:

- Data has been aggregated into in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are aligned with the program settings for DFS units that collect data from roadways with the same speed limit
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

Data represented in this dataset was collected in 2017
Data represented in this dataset is not to be used as or confused with traffic counters, due to the aggregating factor and the alignment of speed ranges to that of DFS units.
Speed survey equipment has a minimum detectable speed of approximately 8 km/hr (which does not align with DFS units which has a 6 km/hr minimum detectable speed)
Speed survey equipment has a maximum detectable speed of approximately 193 km/hr (which also does not align with DFS units which has a 225 km/hr maximum detectable speed)
Speed survey equipment is not programmable (i.e. there are no parameter settings based on the speed limit or a timed schedule as to how to record the data)

Driver Feedback Sign DFS127

Latitude: 53.439985
Longitude: -113.418223

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS148

Latitude: 53.51182
Longitude: -113.59445

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS092

Latitude: 53.493515
Longitude: -113.497863

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

This dataset contains the Mobile Automated Photo Enforcement zone, the approximate road segment within which the Mobile Automated Photo Enforcement operates. This it to compliment the Mobile Automated Photo Enforcement Tickets Issued (by Month) dataset to give a visual perspective of the road segment of where the tickets were issued.

Driver Feedback Sign DFS151

Latitude: 53.414211
Longitude: -113.494566

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS024

Latitude: 53.533953
Longitude: -113.42211

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS045

Latitude: 53.622804
Longitude: -113.560698

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS084

Latitude: 53.56214
Longitude: -113.45103

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.