Driver Feedback Sign DFS129

Latitude: 53.5381
Longitude: -113.47025

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS040

Latitude: 53.553254
Longitude: -113.508541

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS056

Latitude: 53.446964
Longitude: -113.516036

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS082

Latitude: 53.48056
Longitude: -113.58008

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS088

Latitude: 53.455904
Longitude: -113.541686

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS053

Latitude: 53.454004
Longitude: -113.552085

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS127

Latitude: 53.439985
Longitude: -113.418223

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS090

Latitude: 53.54565
Longitude: -113.41835

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS215

Latitude: 53.507072
Longitude: -113.486055

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS048

Latitude: 53.623043
Longitude: -113.52498

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS110

Latitude: 53.49651
Longitude: -113.67788

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS173

Latitude: 53.46166
Longitude: -113.39838

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS179

Latitude: 53.47401
Longitude:-113.463949

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS186

Latitude: 53.476447
Longitude: -113.533269

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS032

Latitude: 53.545834
Longitude: -113.615998

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS184

Latitude: 53.625452
Longitude: -113.473481

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS051

Latitude: 53.4585
Longitude: -113.53006

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS049

Latitude: 53.545631
Longitude: -113.602621

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS005

Latitude: 53.544395
Longitude: -113.557596

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS145

Latitude: 53.51237
Longitude: -113.64124

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS009

Latitude: 53.488041
Longitude: -113.66743

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

This dataset contains the Mobile Automated Photo Enforcement zone, the approximate road segment within which the Mobile Automated Photo Enforcement operates. This it to compliment the Mobile Automated Photo Enforcement Tickets Issued (by Month) dataset to give a visual perspective of the road segment of where the tickets were issued.

This dataset contains the location (the approximate latitude/longitude of the enforcement zone's mid point), the number of tickets issues at the various speed ranges in excess of the enforce speed limit and the number of enforcement hours (Deployment Hours) by month of enforcement.

Driver Feedback Sign DFS036

Latitude: 53.497047
Longitude: -113.511998

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Driver Feedback Sign DFS042

Latitude: 53.523415
Longitude: -113.506515

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.