A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) at St. Dominic Catholic Elementary School.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) or a 50 km/h zone data that occurs just before the 30 km/h zone, at École Frère Antoine Catholic Elementary School.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) at Crawford Plains School.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) or a 50 km/h zone data that occurs just before the 30 km/h zone, at Ormsby School.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) at Minchau School.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) at St. Monica and Riverbend Schools.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

This dataset is an extraction from every driver feedback sign dataset that complies with the speed range indicated for each column.
Datasets or portions of datasets that do not follow this data criteria are not include in this dataset.

This dataset starts Jan 1, 2019 and will continue to build from there.

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:
- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones).

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) or a 50 km/h zone data that occurs just before the 30 km/h zone, at Bessie Nichols School.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) or a 50 km/h zone data that occurs just before the 30 km/h zone, at St. Boniface and Richard Secord Schools.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) at St. Augustine and Duggan Schools.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.

A story board that draws attention to speed data as it relates to playground zones (or 30 km/h zones) or a 50 km/h zone data that occurs just before the 30 km/h zone, at St Cecilia, St Matthew, Archbishop O'Leary Schools.

The data is drawn from the Driver Feedback Sign data and transformed to produce this dataset:

The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal).

Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset.

Details of how the data is collected by the DFS are as follows:

- Data is accumulated and reported in 15 minute intervals
- Vehicle speeds are captured/reported in speed intervals (bins)
- Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting)
- Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts)
- The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN.

Things to note:

DFS devices are not to be used as or confused with traffic counters, as they are not.
DFS devices have a minimum detectable speed of approximately 6 km/hr.
DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr.
DFS devices are programmable with different parameters that can also follow a timed schedule.

Data across the various Driver Feedback Sign datasets are then transformed into 5 km speed range columns to help produce this story.